 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MX23L12811 128M-BIT (8M x 16) MASK ROM WITH PAGE MODE (SOP ONLY) FEATURES * Bit organization - 8M x 16 (word mode) * Fast access time - Random access: 90ns (max.) - Page access: 25ns (max.) * Page size - 8 words per page * Current - Operating:50mA - Standby:15uA * Supply voltage - 3.0 ~ 3.6V * Package - 44 pin SOP (500mil) * Temperature - 0~70 C PIN CONFIGURATION 44 SOP(For Word Mode Only) PIN DESCRIPTION Symbol A0~A22 D0~D15 CE OE VCC VSS NC Pin Function Address Inputs Data Outputs Chip Enable Input Output Enable Input Power Supply Pin Ground Pin No Connection A21 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A20 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 A22 VSS D15 D7 D14 D6 D13 D5 D12 D4 VCC ORDER INFORMATION Part No. MX23L12811MC-12 MX23L12811MC-10 MX23L12811MC-90 Access Time 130ns 100ns 90ns Page Time 50ns 30ns 25ns Package 44 pin SOP 44 pin SOP 44 pin SOP Note Voltage 3.2~3.6V P/N:PM0734 MX23L12811 REV. 1.9, SEP. 19, 2001 1 MX23L12811 ABSOLUTE MAXIMUM RATINGS Item Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature Symbol VIN Topr Tstg Ratings -1.3V to VCC+2.0V (Note) 0C to 70 C -65C to 125 C Note: Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to -1.3V for periods of up to 20ns. Maximum DC voltage on input or I/ O pins is VCC+0.5V. During voltage transitions, inputs may overshoot VCC to VCC+2.0V for periods of up to 20ns. DC CHARACTERISTICS (Ta = 0C ~ 70 VCC = 3.0~3.6V) C, Item Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (TTL) Standby Current (CMOS) Input Capacitance Output Capacitance Symbol VOH VOL VIH VIL ILI ILO ICC1 ISTB1 ISTB2 CIN COUT MIN. 2.4V 2.2V -0.3V MAX. 0.4V VCC+0.3V 0.2 x VCC 5uA 5uA 50mA 1mA 15uA 10pF 10pF Conditions IOH = -0.4mA IOL = 1.6mA 0V, VCC 0V, VCC f=5MHz, all outputs open CE = VIH CE>VCC-0.2V Ta = 25C, f = 1MHZ Ta = 25C, f = 1MHZ AC CHARACTERISTICS (Ta = 0C ~ 70C, VCC = 3.0~3.6V) Item Read Cycle Time Address Access Time Chip Enable Access Time Page Mode Access Time Output Enable Time Output Hold After Address Output High Z Delay Symbol tRC tAA tACE tPA tOE tOH tHZ 23L12811-90 MIN. MAX. 90ns 90ns 90ns 25ns 25ns 0ns 20ns 23L12811-10 MIN. MAX. 100ns 100ns 100ns 30ns 30ns 0ns 20ns 23L12811-12* MIN. MAX. 130ns 130ns 130ns 50ns 50ns 0ns 20ns Note: 1. Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. 2. MX23L12811-12 VCC=3.2~3.6V. P/N:PM0734 REV. 1.9, SEP. 19, 2001 2 MX23L12811 AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~2.4V 10ns 1.4V 1.4V See Figure IOH (load)=-0.4mA DOUT IOL (load)=1.6mA C<100pF Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. TIMING DIAGRAM RANDOM READ ADD ADD tACE ADD tRC ADD CE OE tOE tOH VALID tHZ VALID tAA DATA VALID PAGE READ A3-A22 VALID ADD (A-1),A0,A1,A2 1'st ADD tAA 2'nd ADD tPA VALID VALID 3'rd ADD DATA VALID P/N:PM0734 REV. 1.9, SEP. 19, 2001 3 MX23L12811 PACKAGE INFORMATION 44-PIN PLASTIC SOP P/N:PM0734 REV. 1.9, SEP. 19, 2001 4 MX23L12811 REVISION HISTORY Revision # 1.1 1.2 1.3 1.4 1.5 Description Page Add Order Information P1 Modify Order Information/AC Characteristics MX23L12811MC-12-->13 P1,2 Add Order Information--MX23L12811MC-12 P1,2 Delete Order Information--MX23L12811MC-13 P1,2 Modify Current Operating:60mA-->40mA P1 Modify ICC1:60mA-->40mA, f=5MHz, all outputs open P2 Delete ICC2 P2 Modify Current Operating:40mA-->50mA P1 Modify ICC1:40mA-->50mA P2 Add 90ns access time P1,2 Change Supply voltage:3.4V0.2-->3.0~3.6V P1,2 Add Temperature:0~70 C P1 Change Input Pulse Levels:0.3V~3.0V-->0.4V~2.4V P3 Add 100ns access time P1,2 Modify MX23L12811MC-12 speed-->130ns; Supply voltage-->3.2~3.6V P1,2 Date JUL/27/2000 SEP/07/2000 SEP/21/2000 OCT/03/2000 DEC/12/2000 1.6 1.7 DEC/14/2000 AUG/22/2001 1.8 1.9 AUG/28/2001 SEP/19/2001 P/N:PM0734 REV. 1.9, SEP. 19, 2001 5 MX23L12811 MACRONIX INTERNATIONAL CO., LTD. HEADQUARTERS: TEL:+886-3-578-6688 FAX:+886-3-563-2888 EUROPE OFFICE: TEL:+32-2-456-8020 FAX:+32-2-456-8021 JAPAN OFFICE: TEL:+81-44-246-9100 FAX:+81-44-246-9105 SINGAPORE OFFICE: TEL:+65-348-8385 FAX:+65-348-8096 TAIPEI OFFICE: TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. TEL:+1-408-453-8088 FAX:+1-408-453-8488 CHICAGO OFFICE: TEL:+1-847-963-1900 FAX:+1-847-963-1909 http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice. 6 |
Price & Availability of MX23L12811
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |